MAINTENANCE OF VEHICULAR TRACK SHOE INSTALLATION AND VEHICULAR TRACK SHOE.

TM 9-2350-238-20-1

2-151. MAINTENANCE OF VEHICULAR TRACK SHOE INSTALLATION AND

VEHICULAR TRACK SHOE.

a. R e m o v a l

d. R e a s s e m b l y

This task covers:

e. Installation/Adjustment

b. Disassembly

c. Inspection/Repair

INITIAL SETUP

Tools and Special Tools

Automotive maintenance and repair shop equipment: organizational maintenance, common

no. 1 (less power) (item 80, appx B)

q Torque wrench (0 to 600 ft-lb)

q Wire brush

Drift pin (item 4, appx G)

Impact wire adapter (item 1, appx G)

Slide puller (item 18, appx G)

Track connecting fixture (2) (item 6, appx G)

Materials/Parts

Corrosion preventive sealant (item 35, appx C)

Self-locking nut (2)

Track shoe pad assembly parts kit

Personnel Required

Two

References

TM 9-2350-238-10

TM 9-2350-238-24P-1

Equipment Conditions

2-942 Fender extensions removed

Jacks applied to track

Track tension decreased (TM 9-2350-238-10)

NOTE

q Install

one track before removing the other.

Normally, the right track has 76 track shoes and the left track has 75 shoes. The

number of track shoes may vary due to track wear.

Genera/ Safety Instructions

Keep personnel away from vehicle. Personnel injury could occur when track falls

away from idler wheel.

2-873