Inspection/Repair - TM-9-2350-238-20-10777

TM 9-2350-238-20-1

7 Remove two hexagon socket pipe plugs (7) from transmission (3).

8 Remove four lube pressure check pipe plugs (8) from transmission (3).

9 Remove pipe plug (9) from transmission (3).

1 Inspect for broken, damaged, or missing parts.

2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1 Install pipe plug (9) to transmission (3).

2 Install four lube pressure check pipe plugs (8) to transmission (3).

3 Install two hexagon socket pipe plugs (7) to transmission (3).

4 Install six clutch and brake pressure check point pipe plugs (6) to transmission (3).

5 Install two hexagon socket pipe plugs (5) to transmission (3).

6 Install three pipe plugs (4) to transmission (3).

7 Install new metallic-encased gasket (2) and oil drain machine threaded plug (1) to transmission

(3) .

8 Install powerplant. Refer to page 2-384.

Vehicle has no brakes when final drives are disconnected. Failure to securely block

vehicle tracks could injure personnel or damage vehicle or other equipment if vehicle

rolls out of control.

1 Park vehicle on level ground. Place 12.0 x 12.0 x 24. 0-in. (30.5 x 30.5 x 61.0 cm) wood block

(or equivalent) under front and rear of each track.

2 Remove hull transmission compartment deck assembly. Refer to page 2-938.

2-751