DISASSEMBLY - TM-9-2350-238-20-10688

TM 9-2350-238-20-1

2-92. MAINTENANCE OF LINE CONNECTION TO RIGHT HEADLAMP DISCONNECT

BRANCHED WIRING HARNESS (CONT).

2 Tag and disconnect seven shell

connectors (1) from line connections of

right headlamp disconnect branched wiring

Failure to remove or disconnect

harness.

batteries before removing or installing

any electrical wiring harness or lead

3 Remove four screws (2) and four washers

may result in injury or damaged

(3) and disconnect receptacle connector

equipment.

(4) from light harness connector.

1 Wiring harnesses and leads are secured to

4 If damaged, remove gasket (5) from

the hull and components with loop clamps,

receptacle connector (4).

straps, clips, ground screws, etc. Remove

only the hardware which secures the

5 Remove line connection to right headlamp

wiring harness or lead being removed.

disconnect branched wiring harness (6)

from hull.

DISASSEMBLY

For disassembly of wiring harness receptacle connector, refer to general maintenance, page 2-371.

2-662