Reassembly/Installation - TM-9-2350-238-20-10584

TM 9-2350-238-20-1

2-68. MAINTENANCE OF VOLTAGE REGULATOR AND RELATED PARTS (CONT).

1 Inspect for broken, damaged, or missing parts.

2 If voltage regulator is broken, damaged, or missing, repair is by replacement of next higher

assembly.

3 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet

inspection criteria.

1 Install two regulator mounting brackets (1) on voltage regulator (2) and secure with four

washers (3) and four screws (4).

2 Install voltage regulator (2) with attached mounting brackets, and secure with four flat washers

(5), assembled washer bolt (6), and three assembled washer bolts (7).

3 Install new Iockwasher (8), electrical grounding lead (9), new Iockwasher (8), and assembled

washer screw (10) on voltage regulator (2). Secure new Iockwasher (11), electrical grounding

lead (9), new Iockwasher (11), and hexagon head capscrew (12) to ground.

4 Connect two electrical connectors (13) to voltage regulator (2).

2-558