|
|
TM 9-2350-238-20-1
2-69. MAINTENANCE OF STARTER AND MOUNTING HARDWARE.
b. Inspection/Repair
a. Removal
This task covers:
c. Installation
INITIAL SETUP
Materials/Parts
Gasket
Lockwasher
Lockwasher (2)
Lockwasheer (3)
References
TM 9-2815-202-24P
Equipment Conditions
2-384 Powerplant removed
General Safety Instructions
Starter weighs 80.0 lb (36.3 kg). Be careful when removing it or installing it.
1
Remove hexagon head capscrew (1) and
two Iockwashers (2) securing starter
ground lead (3) to engine block.
2
Remove nut (4) and Iockwasher (5),
electrical lead (6), and starter cable (7).
Reinstall Iockwasher and nut.
3
Remove screw (8) and electrical lead (9)
4
Remove three machine bolts (10) and
lockwashers (11).
5
Carefully pull engine starter (12) from
flywheel housing.
6
Remove gasket (13).
2-559
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |