 |
|||
|
|
|||
|
Page Title:
TYPICAL MALE-TYPE PLUG CONNECTOR. |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
REASSEMBLY
1
Strip cable insulation equal to depth of
solder wells of socket contacts (1).
2
Slide nut (2) over cable (3).
Slide grommet (4) over cable leads (5).
3
insert cable leads (5) into solder wells of
4
socket contacts (1) and solder.
Push insert (6) into shell assembly (7)
5
from rear until seated. Groove (8) in
insert (6) must be aligned with guide in
shell assembly (7) to ensure proper fit.
Push socket contacts (1) into insert (6)
6
from rear until seated.
7
Slide coupling (9) onto shell assembly (7).
Push grommet (4) down cable leads (5) and over solder wells of socket contacts (1).
8
Screw nut (2) onto shell assembly (7).
9
2-19. TYPICAL MALE-TYPE PLUG CONNECTOR.
DISASSEMBLY
1 Unscrew nut (1) from shell assembly (2)
and slide back on cable (3).
2 Slide grommet (4) back on cable leads (5).
3 Slide coupling (6) off shell assembly (2).
4 Drive pin contacts (7) out through rear of
insert (8) with pin extractor.
5 Push insert (8) out through rear of shell
assembly (2).
(7).
2-375
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals