|
|
TM 9-2350-238-20-1
REASSEMBLY
1
Strip cable insulation to depth of solder
wells of socket contacts (1).
Slide nut (2) over cable (3).
2
Slide grommet (4) over cable leads (5).
3
Insert cable leads (5) into solder wells of
4
socket contacts (1) and solder.
Push insert (6) into shell assembly (7)
5
from rear until seated. Groove (8) in
insert (6) must be aligned with guide in
shell assembly (7) to ensure proper fit.
Push socket contacts (1) into insert (6)
6
from rear until seated.
Push grommet (4) down cable leads (5)
7
and over solder wells of socket contacts
(1).
8
Screw nut (2) onto shell assembly (7).
2-17. TYPICAL MALE-TYPE PANEL MOUNTING RECEPTACLE CONNECTOR.
DISASSEMBLY
1 Unscrew nut (1) from shell assembly (2)
and slide back on cable (3).
2 Push grommet (4) back on cable leads
(5).
3 Drive pin contacts (6) out through rear of
insert (7) with pin extractor.
4 Push insert (7) out through rear of shell
assembly (2).
(6).
2-373
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |