STARTER CIRCUITS. (Cont) - TM-9-2350-238-20-10148

TM 9-2350-238-201

2-12. ELECTRICAL CIRCUIT TROUBLESHOOTING (CONT).

Make sure MASTER switch is OFF before repairing

electrical circuits. Failure to observe this warning

could result in injury to personnel.

Step 11.

Place red probe in lead 14 (terminal end) of START switch. Ground black

probe. Set MASTER and INST switches ON. Press START switch. If

multimeter indicates no voltage, replace START switch. Refer to page

2-566. If multimeter indicates about 24 volts, go to step 12. Set MASTER

and INST switches OFF. Connect lead 14 to START switch.

2-122