Table H-1. Torque Limits for Dry Fasteners

H-1

TM 9-2330-202-14&P

H-3.

HOW TO USE TORQUE TABLE (continued).

To find the grade of the screw that is to be installed, match the markings on the head to the correct picture of

CAPSCREW HEAD MARKINGS

CAPSCREW HEAD MARKINGS on the table.

Manufacturer's marks may vary.

These are all SAE Grade No. 5 (3 lines).

Look down the column under the picture found in step 5 until the torque limit in foot-pounds for the diameter

and threads per inch of the screw being installed is found.

Table H-1. Torque Limits for Dry Fasteners

SAE CAPSCREW HEAD

MARKINGS

H-2