HYDRAULIC BRAKE ACTUATOR ASSEMBLY REPLACEMENT (CONTINUED)

TM 9-2330-202-14&P

4-38.

HYDRAULIC BRAKE ACTUATOR ASSEMBLY REPLACEMENT (CONTINUED).

Connect hydraulic brake front tube assembly (6) to connector (7) at master cylinder (8).

Install loop clamp (3), with intervehicular cable (4) on hydraulic brake actuator assembly (5) with new

self-locking nut (2).

10.

Make sure front support leg (14) is locked in lowered position. Remove jackstands from under two

drawbars (1).

11.

If a new hydraulic brake actuator assembly (5) was installed, install new brake fluid caution decal to

hydraulic brake actuator assembly (5) (para 1-13).

438-079

FOLLOW-ON TASKS:

Lubricate hydraulic brake actuator assembly and service master cylinder as required

Bleed hydraulic brake system (para 4-41).