|
|
TM 9-2330-202-14&P(
SERVICE BRAKE ADJUSTMENT.
This Task Covers:
Adjustment
Initial Setup:
Tools/Test Equipment:
Common No. 1 tool set (Item 2, Appendix B)
General mechanic's tool kit (Item 1, Appendix B)
ADJUSTMENT
NOTE
The procedure for adjusting service brake is the same for left side and right side.
1.
Apply handbrake (para 2-10). Chock wheel and tire assembly (1) opposite side of service brake
being adjusted.
2.
Raise axle (2) on side being adjusted until wheel and tire assembly (1) is off the ground.
3.
Release handbrake on side being adjusted (para 2-10).
4.
Remove cover (3) from backing plate (4).
5.
While turning wheel and tire assembly (1), turn adjusting screw (5) until brakes drag lightly. Then turn
adjusting screw (5) in opposite direction one click.
6.
Install cover (3) in backing plate (4).
7.
Lower axle (2). Apply handbrake on adjusted side (para 2-10).
438-076
FOLLOW-ON TASKS:
Adjust handbrakes (para 4-34).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |