|
|
TM 9-2330-202-14&P
4-33.
HANDBRAKE LEVER AND LINKAGE REPLACEMENT (CONTINUED).
438-069
NOTE
Configuration varies. If installing new cable and U-bolt, perform steps 5.1 and 5.2.
5.1. Drill two new 5/16 inch holes (11.4) 1 inch apart and 1 inch behind existing mounting holes in frame
side.
NOTE
Align U-bolt in groove of cable end.
5.2. Install U-bolt (11.3), two new lockwashers (11.2), and nuts (11.1).
6.
Install spacer plate (10), cable assembly (3), and retaining strap (9) on frame (11) with two machine
screws (8) and new self-locking nuts (7).
7.
Repeat steps 1 through 6 for installation of other handbrake lever and linkage.
438-015
FOLLOW-ON TASKS:
Install hub and brakedrum (para 4-43).
Install wheel and tire assembly (para 4-44).
Lubricate handbrake lever and linkage (Appendix I).
Adjust handbrakes (para 4-34).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |