|
|
TM 9-2330-202-14&P
4-33.
HANDBRAKE LEVER AND LINKAGE REPLACEMENT (continued).
c.
INSTALLATION
1.
Connect cable assembly (3) to handbrake lever
(15).
2.
Position two washers (16) at frame (11) and
install handbrake lever (15) with two spacers
(14), capscrews (13), and new self-locking nuts
(12).
CAUTION
Cable must be positioned below top spacer. To do otherwise causes cable to jump off pulley,
resulting in damage to cable.
3.
Feed cable assembly (3) through backing plate (6) and position at handbrake lever (4).
4.
Make sure lock tangs (5) are spread and hold cable assembly (3) in backing plate (6).
5.
Pull spring (1) away from swaged sleeve (2), and hook swaged sleeve (2) to handbrake lever (4).
4-52
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |