|
|
TM 9-2330-202-14&P
4-33.
HANDBRAKE LEVER AND LINKAGE REPLACEMENT (CONTINUED).
a.
REMOVAL
1.
At wheel brake, pull spring (1) away from swaged sleeve (2) and unhook swaged sleeve (2) of cable
assembly (3) from handbrake lever (4).
438-068
2.
Compress lock tangs (5).
3.
Remove cable assembly (3) from handbrake lever (4) through backing plate (6).
NOTE
Configuration varies. Perform step 4 or 4.1 as applicable.
4.
Remove two self-locking nuts (7) and machine screws (8), retaining strap (9), cable assembly (3),
and spacer plate (10) from frame (11). Discard self-locking nuts.
4.1. Remove two nuts (11.1), lockwashers (11.2), and U-bolt (11.3). Discard lockwashers.
438-015
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |