INSTALLING RACK, TAILGATE, AND CANVAS COVER ASSEMBLIES (M101A2 AND M101A3)

TM 9-2330-202-14&P

2-11.

INSTALLING RACK, TAILGATE, AND CANVAS COVER ASSEMBLIES (M101A2

AND M101A3).

WARNING

Side rack assembly is heavy and awkward to handle. To prevent injury to

personnel, use extreme caution and get assistance when handling.

NOTE

Two persons are required when performing this task.

Apply handbrakes (para 2-10).

Lift road-side side rack assembly (1) into posi-

tion above cargo body (2), with bow clips (3)

toward front of trailer.

Align five stakes (4) with five stake pockets (5)

in cargo body (2). Push stakes (4) evenly into

stake pockets (5) until road-side side rack

assembly (1) is fully installed in cargo body (2).

Repeat steps b and c to install curb-side side

rack assembly (1).

Position front rack assembly (6) between road-

side and curb-side side rack assemblies (1).

438-047

At road-side corner, align two strap hinge assemblies (7) on front rack assembly (6) with two hinges (8) on

roadside side rack assembly (1).

Install two straight headed pins (9), with heads facing up, in two strap hinge assemblies (7) and hinges (8).

Install two cotter pins (10) in straight headed pins (9).

At curb-side corner, repeat steps f and g to install front rack assembly (6) on curb-side side rack assembly

(1).

438-119