|
|
TM 9-2330-202-14&P
2-11.
INSTALLING RACK, TAILGATE, AND CANVAS COVER ASSEMBLIES (M101 A2 AND M101A3) (continued).
i.
At rear of trailer, align two strap hinge assemblies (11) on tailgate assembly (12) with two hinges (13) on road- side
side rack assembly (1).
j.
Install two straight headed pins (14), with heads facing up, in two strap hinge assemblies (11) and hinges (13).
Install two cotter pins (15) in two straight-headed pins (14).
k.
At curb side, repeat steps i and j to install curb-side tailgate assembly (16) on curb-side side rack assembly (1).
I.
Close both tailgate assemblies (12 and 16).
m.
Install connecting link (17) in two top strap latch assemblies (18) of both tailgate assemblies (12 and 16).
n.
Install two connecting links (19) in two bottom strap latch assemblies (20) on both tailgate assemblies (12 and 16)
and two holes in cargo body (2).
o
Align one of five bow assemblies (21) with two
stakes (4) in both side rack assemblies (1)
Push bow assembly (21) evenly into stakes
(4) until fully installed in side rack assemblies
(1).
p.
Repeat step o to install remaining four bow
assemblies (21).
2-13
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |