OPERATION OF WINDSHIELD WIPERS

TM 9-2320-386-10

2-20. OPERATION OF WINDSHIELD WIPERS

General. The M35A3, M35A3C, and M36A3 series vehicles are equipped with an

electrical windshield wiper motor. Power for the motor is provided by the batteries.

a. Turn vehicle accessory/battery switch ON.

b. Turn windshield wiper motor (2) ON by turning motor knob (1) right

(clockwise).

c. Turn knob (1) slowly to the right (clockwise) at 45 degree angle. Once wipers

(3) activate, they are set on LOW setting.

d. Turn knob (1) further to the right (clockwise) at 90 degree angle, and wipers

(3) will be set in HIGH position.

e. Turn knob (1) left (counterclockwise) until wipers (3) stop. The wipers (3) will

be set in OFF position.