 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
18-3. WINDSHIELD WIPER BLADE AND ARM REPLACEMENT (CONT)
b. Installation
(1) Insert hex key (1) through hole (2).
(2) Install blade (3) on wiper arm (4) with
screw (5) and new locknut (6).
(3) Install wiper arm (4) on stud (7) with new
lockwasher (8) and nut (9). Torque to 90-
110 lb-in. (10.2-12.4 Nm).
(4) Remove hex key (1) from hole (2) on
wiper arm (4).
(5) Connect hose (10) to nozzle (11).
(6) Close hood (TM 9-2320-360-10).
c. Adjustment
(1) Turn washer nozzles (1) with screwdriver
to adjust direction of washer spray.
(2) Turn ENGINE switch to ON position (TM
9-2320-360-10).
(3) Press windshield washer switch (2) on
instrument panel to check washer spray
pattern.
(4) Turn ENGINE switch to OFF position (TM
9-2320-360-10).
(5) Repeat steps (1) thru (4) if additional
adjustment is required.
d. Follow-On Maintenance
(1) Turn ENGINE switch to ON position
(TM 9-2320-360-10).
(2) Check
operation
of
wiper
arm
(TM 9-2320-360-10).
(3) Turn ENGINE switch to OFF position
(TM 9-2320-360-10).
(4) Remove wheel chocks.
18-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
