WINDSHIELD WASHER RESERVOIR, HOSE, AND NOZZLE REPLACEMENT

TM 9-2320-360-20-2

18-4. WINDSHIELD WASHER RESERVOIR, HOSE, AND NOZZLE REPLACEMENT

This task covers:

a. Removal

Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut off (TM 9-2320-360-10).

Tags, Identification (Item 32, Appendix C)

Parking brake on (TM 9-2320-360-10).

Lockwashers (4) (Item 100, Appendix G)

Wheels chocked.

Engine hood opened (TM 9-2320-360-10).

Personnel Required

Two

Tools and Special Tools

Tool Kit, Genl Mech (Item 54, Appendix F)

a. Removal

NOTE

Tag and mark hoses before removal.

(1) Remove clamps (1), air hose (2), and

hose (3) from top of reservoir (4).

(2) Remove reservoir (4) from bracket (5).

(3) Remove four screws (6), lockwashers (7),

and bracket (5) from firewall (8). Discard

(4) Remove screw (9) and clip (10) from

firewall (8).

(5) Remove 13 screws (11) and dash access

panel (12) from dash (13).

18-7