 |
|||
|
|
|||
|
Page Title:
WINDSHIELD WIPER BLADE AND ARM REPLACEMENT/ADJUSTMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-360-20-2
18-3. WINDSHIELD WIPER BLADE AND ARM REPLACEMENT/ADJUSTMENT
This task covers:
a. Removal
c.
Adjustment
b. Installation
d.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut off (TM 9-2320-360-10).
Materials/Parts
Parking brake on (TM 9-2320-360-10).
Locknut (Item 45, Appendix G)
Wheels chocked.
Lockwasher (Item 87, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Wrench, Torque, 0-200 Lb-In. (Item 72,
a. Removal
WARNING
Do not use hood as a work platform.
Using hood as a work platform may
result in injury to personnel and/or
equipment damage.
NOTE
Both wipers are replaced the same
way.
(1) Open hood (TM 9-2320-360-10).
NOTE
A 7/64 in. (3 mm) hex key is used to
lock windshield wiper blade.
(2) Lift wiper arm (1) and insert hex key (2)
through hole (3).
(3) Remove nut (4), lockwasher (5), and wiper
arm (1) from stud (6).
Discard
lockwasher.
(4) Disconnect hose (7) from nozzle (8).
(5) Remove hex key (2) from hole (3) on
wiper arm (1).
(6) Remove locknut (9), screw (10), and blade
(11) from wiper arm (1). Discard locknut.
18-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
