2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
11-3. BRAKE DRUM/SHOES REPLACEMENT
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Wheel/tire removed (para 12- 5).
Socket Wrench Set, 3/8 In. Drive (Item 45,
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Screw, Cap, Hex Head 10 mm (Item 40.1
Personnel Required
Two
Socket, Sockethead Screw, 6 mm (Item 44,
a. Removal
NOTE
Do steps (1) thru (7) for axle no. 2, 3,
and 4 only.
(1) Remove nut (1), washer (2), and tool (3)
from mounting position on brake chamber
(4).
MUD FLAP REMOVED FOR CLARITY
(2) Remove dust cap (5) from access hole (6)
in brake chamber (4).
(3) Insert tool (3) in access hole (6) and align
with slot (7) inside brake chamber (4).
(4) Push tool (3) in slot (7) until it stops.
(5) Turn tool (3) 900 and p ll out until it is
u
seated and stops.
(6) Install washer (2) and nut (1) on tool (3).
(7) Release brake chamber (4) by tightening
nut (1) down (clockwise) until it stops.
11-4 Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |