 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. Installation
(1) Tighten nut (1) and screw (2) on adjusting strap
(3).
CAUTION
Arctic kit belts must be installed if
temperatures below -37 F (-38 C) are
expected. Arctic kit belts should not
be used if temperature is continually
above 80 F (27 C). Failure to comply
may result in shortened belt life.
(2) Install two belts (4) on alternator pulley (5) and
engine pulley (6).
(3) Adjust belts (para 7-6c.)
c. Adjustment
NOTE
If belts have been replaced, begin
with step (3).
(1) Loosen nut (1) on screw (2) at bottom of
alternator (3).
(2) Loosen nut (4) on top of alternator (3).
(3) Adjust tension on two belts (5) by turning
adjusting nut (6) counterclockwise.
(4) Position belt tension gage (7) on belt (5).
(5) When belt tension gage indicates 70-90 lb (310-
400 N), tighten nut (4) on top of alternator (3).
(6) Tighten screw (8) on rod end eye (9).
(7) Tighten nut (1) on screw (2) on bottom of
alternator (3).
(8) Remove belt tension gage (7) from belt (5).
Change 2 7-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
