 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-3.
TORQUE CONVERTER (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY
18
Stator
a
Cam (39) and
Assemble
If stator assembly (21) was
assembly
stator (40)
disassembled. Cam
pocket
(21)
positioned as shown
b.
Washers (37
Position
One on each side of stator
and 38)
(37)
c.
New washers (34
Position
If removed
and 35)
d.
New rivets (36)
Line up rivet holes and install
new rivets from rear to front of
stator (40). Install top and base
plates, as shown, making sure
rivet heads are between holes.
Install retaining capscrew and
strike top plate with rubber
mallet to seat parts. Tighten
cap- screw to 60 pounds foot.
Place stator assembly (21) on
fixture stand. Install rivet punch
in fixture head and tighten
thumb screw. Apply about 8000
pound load with press to swage
rivet. Swage second rivet 180
de- grees from first. Swage
third rivet 60 degrees from
second. Swage fourth rivet 180
degrees from third, etc., until all
rivets are swaged. Remove
capscrew, top plate, and base
plate
4-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals