 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-3.
TORQUE CONVERTER (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
16
b
Cover assembly
Clean
Use clean cloths moistened
(cont)
(3) and con-
with cleaning solvent
verter pump
P-D-680 Dry with moisture
assembly (14)
free compressed air
Be
sure not to lose any cap-
screws (41) from converter
pump assembly (14)
INSPECTION
17
a
Stator (40) and
Inspect
Inspect for cracks, distor-
cam (39)
tion, and swollen rivet
holes If either part is de-
fective, replace entire
stator assembly (21). Check
rivet holes for burrs.
Deburr if necessary
b
Bearing assembly
Inspect
Lubricate with automatic
(25) transmission fluid.
Replace
race (22) over bearing as-
sembly (25) in hub of stator
assembly (21) Rotate bear-
ing assembly (25) while
pressing on race (22). Leave
bearing assembly (25) in
stator assembly (21) if
there is no roughness or
binding
If defective,
remove
See step 8c
c
Race (22)
Inspect
Inspect bearing ends for
smoothness. Replace if there
are any marks or scratches
d
Bushing (12)
Inspect
Inspect for scratches and
scoring. Replace if neces-
sary See step 3i
e
Washers (34 and
Inspect
Inspect for cracks, distor-
35) and rivets
tion and other damage.
(36)
Check to see if rivets are
bent or broken. Replace if
necessary. See step 14a-
b
f
All other parts
Inspect
Inspect for any damage making
them defective. Replace if
necessary
4-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals