DISASSEMBLY (cont) - TM-9-2320-285-24-20490

TM 9-2320-285-24-2

4-3.

TORQUE CONVERTER (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY (cont)

Converter

Capscrews

Remove

If inspection shows replace-

pump assem-

(41)

ment is

necessary

Drive out

bly (14)

with brass hammer

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause ser- ious injury. If you

become dizzy while using cleaning solvent, get fresh air immediately, and

get medi- cal attention. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when

drying parts with compressed air. Failure to do so could cause serious

injury to eyes and possible blindness. If you hurt your eyes or if a foreign

object is blown into your eyes, seek medical attention immediately.

All parts except

Clean

Use cleaning solvent P-D-680.

cover assembly

Immerse parts in cleaning

(3) and con-

solvent and move up and

verter pump

down until all old lubri-

assembly (14)

cant and foreign material

is dissolved Dry parts

thoroughly after removal

from cleaning solvent with

moisture free compressed air

or clean cloths. Don't use

compressed air on any

bearings

4-9