|
|
TM 9-2320-285-24-2
4-3.
TORQUE CONVERTER (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
18
e
New bearing
Install
Only if removed earlier.
(cont)
assembly (25)
Use bearing installer to
drive bearing assembly into
bore of stator assembly (21).
Be sure pressure is is born by
outer shell of bearing assembly
only. Install until top of outer
shell is 0.025 to 0.035 inch
above the shoulder in the side
plate as shown
19
Converter
a
New gasket (32)
Position
Must be dry
pump assem-
b
Converter pump
Position
Line up holes in converter
bly (14)
hub (1)
pump assembly (14),
gasket
(32), and converter pump
hub
(1)
c
Four new lock-
Position
ing strips
(30)
d
Eight cap-
Install
Tighten to 9-11 pounds foot
screws (31)
e
Locking strips
Bend corners
Against heads of capscrews
(30)
4-12
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |