RADIATOR ACCESS PANEL WILL NOT LATCH OR UNLATCH (Cont)

TM 9-2320-285-24-1

2-62. BODY AND CAB TROUBLESHOOTING (CONT)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

5. RADIATOR ACCESS PANEL WILL NOT LATCH OR UNLATCH (Cont)

Step 3.

Check if radiator access panel or hinge is damaged or distorted.

If radiator access panel or hinge is damaged or distorted, replace (para 2-65g).

6. TOOL BOX WILL NOT OPEN OR CLOSE

Check tool box for cracks, wear, or distortion.

If tool box is cracked, worn, or distorted, replace (para 2-65n).

7. CAB GRILLE GUARD WILL NOT TILT FORWARD

WARNING

Support cab grille guard before removing pins. Grille guard is heavy; do

not allow it to fall forward freely. Failure to follow this procedure could

result in injury from falling grille guard. If you are injured, obtain medical

aid immediately.

Step 1.

Try to remove pins from grille guard (para 2-65e).

If pins can not be removed, go to step 2 below.

If pins are removed, go to step 3 below.

Step 2.

Check pins and pin retainers for cracks, wear, or bent or twisted condition.

If pins or pin retainers are cracked, worn, bent, or twisted, replace (para 2-65e).

b. If pins and pin retainers are not cracked, worn, bent, or twisted, go to step 4 below.

Step 3.

Check if grille guard mounting parts are bent, damaged, or over-tightened.

If grille guard mounting parts are over-tightened, loosen; if parts are bent or damaged, replace

If grille guard mounting parts are not bent, damaged, or over-tightened, go to step 4 below.

2-676