|
|
TM 9-2320-285-24-1
2-62. BODY AND CAB TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. DOOR STICKS, OR WILL NOT OPEN OR CLOSE
Step 1.
Check for obstructions at door edges.
a.
If obstructions are found, remove.
b.
If obstructions are not found, go to step 2 below.
Step 2.
Check if hinge, door jamb, or door restraints are bent or damaged.
a.
If parts are bent or damaged, replace (para 2-65i).
b.
If parts are not bent or damaged, go to step 3 below.
Step 3.
Check if striker bolt is loose, bent, or damaged.
a.
If striker bolt is loose, bent, or damaged, replace (para 2-65i).
b.
If striker bolt is okay, notify direct support maintenance.
4. HOOD WILL NOT LATCH OR UNLATCH
Step 1.
Check hood latch parts for damage, wear, or bent condition.
a.
If parts are damaged, worn, or bent, replace (para 2-65f).
b.
If parts are not damaged, worn, or bent, go to step 2 below.
Step 2.
Check hood for damage or distortion.
If hood is distorted or damaged, replace (para 2-65f).
5. RADIATOR ACCESS PANEL WILL NOT LATCH OR UNLATCH
Step 1.
Check radiator access panel latch for bent condition or damage.
a.
If latch is bent or damaged, replace (para 2-65g).
b.
If latch is not bent or damaged, go to step 2 below.
Step 2.
Check if rubber strips are cracked, worn, or deteriorated.
a.
If rubber strips are cracked, worn, or deteriorated, replace (para 2-65g).
b.
If rubber strips are okay, go to step 3 below.
2-675
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |