|
|
TM 9-2320-285-24-1
2-62. BODY AND CAB TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. CAB GRILLE GUARD WILL NOT TILT FORWARD (Cont)
Step 4.
Check grille guard for cracks, wear, or distortion.
If grille guard is cracked, worn, or distorted, replace (para 2-65e).
8. CAB DIFFICULT TO RAISE OR WOBBLES WHEN RAISED
Step 1.
Check cab pivot pins and bushings for looseness, wear, damage, or bent condition.
a.
If pivot pins and bushings are loose, tighten (para 2-65k); if worn, damaged, or bent, replace (para
b.
If pivot pins and bushings are not loose, worn, damaged, or bent, go to step 2 below.
Step 2.
Check pivot pins for inadequate lubrication. Check lubrication fittings for damage.
a.
If pivot pins are inadequately lubricated, lubricate (para 2-65k).
b.
If lubrication fittings are damaged, replace (para 2-65k).
c.
If pivot pins are adequately lubricated and lubrication fittings are not damaged, notify direct support
maintenance.
2-677
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |