 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-29.
WATER LEVEL WARNING KIT MAINTENANCE (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
ON-VEHICLE TESTING (cont)
9
Water level
Observe
Multimeter should indicate
sensor
infinity with engine
operating. If multimeter
indicates zero ohms, re-
place water level sensor
(step 13 below)
10
Cab tilt
Cab
Tilt 45
pump
degrees
11
Water
a. Multimeter
Disconnect
level
b. Blue/brown
Connect
To water level sensor red
sensor
wire lead
wire lead using crimp
connector
c. White wire
Connect
To water level sensor green
lead
wire lead using crimp
connector
12
Cab tilt
Cab
Lower
To normal operating position
pump
REMOVAL
13
Cab tilt
Cab
Tilt 45
pump
degrees
14
Engine
Radiator
Drain
compartment
NOTE
Tag wire leads before disconnecting them to aid ininstallation.
15
Water level
a. Crimp connectors Remove
Cut wires as close to con-
sensor (10)
(1 and 2)
nector as possible
b. Clamps (3 and 4) Loosen
c. Hoses (5 and 6)
Disconnect
Don't remove clamps (3 and 4)
d. Two capscrews
Remove
(7) and nuts
(8)
e. Bracket (9)
Remove
From vehicle
and water
level sensor
(10)
2-302
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals