|
|
TM 9-2320-285-24-1
2-13.
FUEL SYSTEM MAINTENANCE (CONT)
e. Accelerator and Throttle Linkage (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
8
e. Bearing block
Inspect for
Replace if defects observed.
(cont)
(58) and
cracks
Remove bushings (59) by
bushings (59)
breaks
pressing out of bearing
block using proper size
sleeve. Install new bush-
ings by pressing into
bearing block
f. Remaining parts
Inspect for
Replace if defects observed
cracks
breaks
deformation
wear
damaged
threads
INSTALLATION
9
Cab
a. Pedal assembly
Position
interior
(10)
b. Two lock wash-
Install and
ers (67) and
tighten
capscrews
(66)
c. Nut (65) and
Install
Don't tighten nut (65)
capscrew (64)
10
Shaft
a. Nylon roller
Position
On shoulder bolt (61)
assembly
(62)
(60)
b. Shoulder bolt
Install
In shaft assembly (60); use a
(61) with
punch and hammer to stake
nylon roller
threads
installed
c. Lock ring (63)
Install
On shaft assembly (60)
11
Cab
a. Shaft assembly
Install
In hole in cab firewall
interior
(60)
b. Cab
Tilt 45
degrees
12
Cab side
a. Assembled bear-
Install
On shaft assembly (60)
ing block (58)
and two bush-
ings (59)
2-110
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |