|
|
TM 9-2320-285-24-1
2-13.
FUEL SYSTEM MAINTENANCE (CONT)
e. Accelerator and Throttle Linkage (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
7
a. Accelerator
Clean
Use clean cloth moistened
cable (11)
with detergent; dry using
and modulator
clean cloths
cable assem-
bly (25)
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use near open
flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If you become dizzy
while using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or clothes is made, flush
with large amounts of water. If contact with eyes is made, wash eyes with water and seek medical aid immediately.
b. Remaining parts
Clean
Use cleaning solvent P-D-680;
dry using clean cloths
INSPECTION
8
a. Springs (1 and
Inspect for
Replace if defects observed
24)
deformation
permanent
set
b. Accelerator
Inspect for
Replace if defects observed
cable (11)
freedom of
and modulator
movement
cable assem-
kinks
bly (25)
damage
c. Nylon roller
Inspect for
Replace if defects observed
(62)cracks
flat spots
d. Pedal assembly
Inspect for
Replace if defects observed
(10)
damaged
hinge
2-109
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |