DATA PLATES SECURED WITH SELF-TAPPING SCREWS

TM 9-2320-270-20-3

DATA PLATES SECURED WITH SELF-TAPPING SCREWS

This task covers:

INITIAL SETUP

Materials/Parts

Tools

Data Plate (as required)

Hammer, machinist's ball-peen

Self-tapping screw (as required)

Screwdriver, cross-tip, number 1

Screwdriver, fiat-tip, 1/4-inch

Personnel Required

One

ACTiON

ITEM

REMARKS

LOCATION

REPLACEMENT

NOTE

Except as noted, steps in this task are the same for all data plates secured with self-

tapping screws. The truck cab number plate is shown.

Truck cab serial number plate uses cross tip screws, all others use slotted screws.

Using screwdriver, unscrew and take out.

Two screws (3)

1. Data plate (1)

to door(2)

Take off.

Data plate (1)

2. Door(2)

TA240835

4-1327