|
|
TM 9-2320-270-20-3
MIRROR MOUNTING TUBE ASSEMBLY
This task covers:
a. Removal (page 4-1232)
b. Installation (page 4-1236)
INITIAL SETUP
Materials/Parts Continued
Tools
Lockwasher, front and rear outer cross
Extension, 5-inch, 3/8-inch drive
braces to support arm
Handle, ratchet, 1/4-inch drive
Lockwasher, mounting tube bracket to two
Handle, ratchet, 3/8 inch drive
brackets (four required)
Pliers, slip-joint, straight-nose
Lockwasher, mirror mounting tube bracket to
Screwdriver, cross-tip, number 2
roof (two required)
Socket, 5/16-inch, 1/4-inch drive
Lockwasher, rear inner cross brace to bracket
Socket, 3/8-inch, 3/8-inch drive
Lockwasher, Left mirror mounting tube
Socket, 7/16-inch, 3/8-inch drive
bracket to roof (two required)
Socket, 9/16-inch, 3/8-inch drive
Wrench, box, 7/16-inch
Personnel Required
Wrench, open-end, 9/16-inch
Wrench, open-end, 7/8-inch
One
Materials/Parts
Equipment Condtion
Lockwasher, front inner cross brace
Rear view mirror removed (page 4-1226).
to bracket
Mirror detent loop assembly removed
ACTION
REMARKS
ITEM
LOCATiON
REMOVAL
NOTE
Steps 1 thru 6 are the same for removing both right and left support arms. Right support
arm is shown.
4-1232
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |