|
|
TM9-2320-270-20-3
REAR VIEW MIRROR HEAD
This task covers:
a. Removal (page 4-1226)
b. Installation (page 4-1226)
INITIAL SETUP
Materials/Parts - Continued
Tools
Lockwasher, mirror assembly to bracket
Handle, ratchet, 3/8-inch drive
(two required)
Socket, 7/16-inch, 3/8-inch drive
Wrench, box, 7/16-inch
Personnel Required
Materials/Parts
Two
Head, mirror assembly
Lockwasher, mirror assembly to
bracket (two required)
ACTION
ITEM
REMARKS
LOCATION
--
REMOVAL
NOTE
Steps in this task are the same for both right and left rearview mirror heads. Right mirror
head is shown.
a.
Using box wrench, socket, and handle,
Nut (3), Iockwasher
1. Mirror head (1) to
(4), convex mirror
unscrew and take out.
detent loop (2)
b.
and bracket (5),
Get rid of Iockwashers (4) and (7).
spacer (6), lock-
washer (7), and
screw (8)
Using box wrench, socket, and handle,
Nut (9), Iockwasher
a.
2.
unscrew and take out.
(10), spacer (11),
lockwasher(12),
b.
Get rid of Iockwashers (10) and (12).
screw (13), and
mirror head (1)
INSTALLATION
Put through.
3. New mirror head (1)
Screw (13) and new
Iockwasher(12)
4-1226
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |