REMOVAL - TM-9-2320-270-20-30135

TM 9-2320-270-20-3

SPARE TIRE WINCH CABLE- CONTINUED

ACTION

LOCATION

ITEM

REMARKS

Cable (4) and

Using pliers, bend cable (4) as shown and

clamp (6)

hold in place with clamp (6).

9. Clamp (6)

Nut (7)

Screw on and tighten using ratchet and

7/16-inch socket.

10. Winch (2)

Winch lever (3)

Put in wind position.

WARNING

Leather gloves must be worn when handling cable to prevent cuts and scrapes. Never let

cable run through hands. Broken and frayed wires can cause injury.

11.

Crank (5) and

Using crank (5), wind on cable (4)

cable (4)

until there is about 3 feet (1 m) left.

12. Spare tire mount (1)

Hook (9)

Secure on spare tire mount (1).

13.

Crank (5) and

Using crank (5), wind in until tight.

cable (4)

NOTE

FOLLOW-ON MAINTENANCE: Check winch operation (TM 9-2320-270-10).

TASK ENDS HERE

TA240665

4-1063