SPARE TIRE WINCH CABLE

TM 9-2320-270-20-3

SPARE TIRE WINCH CABLE

This task covers:

a. Removal (page 4-1062)

b. Installation (page 4-1062)

INITIAL SETUP

Personnel Required

Tools

Two

Pliers, slip-joint

Handle, ratchet, 3/8-inch drive

Socket, 7/16-inch, 3/8-inch drive

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

Put in drain released position.

Winch Iever (3)

1. Spare tire mount

(1) and winch (2)

WARNING

Leather gloves must be worn when handling cable to prevent cuts and scrapes. Never let

cable run through hands. Broken and frayed wires can cause injury.

Have assistant pull on cable as you, using

Cable (4) and

crank, unwind it until there is less than

crank (5)

one turn of cable left and clamp (6) is

accessible.

Using 7/16-inch socket and ratchet handle,

Nut (7) and

unscrew and take off.

clamp (6)

Route end through hole and pull off.

Cable (4)

4. Winch (2)

a. Pull through.

Cable (4)

5. Cable wheel (8)

b. Look for broken and frayed wires.

and spare tire

mount (1)

INSTALLATION

Route between.

Cable (4)

6. Spare tire mount

(1) and wheel (8)

Route through hole.

Cable (4)

7. Winch (2)

4-1062