|
|
TM 9-2320-270-20-3
BOOSTER CYLINDER
This task covers:
d. Inspection/Replacement (page 4-1020)
a. Removal (page 4-1016)
e. Assembly (page 4-1020)
b. Disassembly (page 4-1018)
f. Installation (page 4-1020)
c. Cleaning (page 4-1020)
INITIAL SETUP
Materials/Parts - Continued
Tools
Dust seal, ball stud
Brush, wire
Dust seal, booster end
Chain, hydraulic hand jack
Fluid, power steering (LO 9-2320-270-1 2)
Chain plate, hydraulic hand jack
Packing, preformed, adapter to booster
Extension, 3/4-inch drive, 5-inch
(two required)
Hammer, plastic
Rope (item 11, appendix C)
Handle, hydraulic hand jack
Tag, marking (item 18, appendix C)
Handle, ratchet, 3/4-inch drive
Pan, drain
Personnel Required
Pliers, long-nose, round
Puller, mechanical
One
Screwdriver, flat-tip, 1/4-inch
Socket, 1 1/4-inch, 3/4-inch drive
Equipment Condition
Socket, 1 13/16-inch, 3/4-inch drive
Wrench, open-end, 7/16-inch
Left side of hood opened (TM 9-2320-270-10).
Wrench, open-end, 9/16-inch
Wrench, open-end, 7/8-inch (two
required)
Materials/Parts
Cotter pin, booster end to frame
bracket
Cotter pin, drag link to booster
ball stud
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Park on level surface with front wheels
Truck
1.
steered straight ahead.
a. Place container underneath.
Drainplug (2)
2. Power steering
b. Using 9/16-inch wrench, unscrew and
reservoir (1)
take out.
c. Allow fluid to drain.
4-1016
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |