|
|
TM 9-2320-270-20-3
BOOSTER CYLINDER - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
a. Using pliers, take out.
Cotter pin (3)
Pitman arm to
5.
b. Get rid of.
booster cylinder
drag link (1) to
ball stud (2)
Using 1 1/4-inch socket and 3/4-inch
Nut (4)
6.
handle, unscrew and take off.
a. Using puller, pull off.
Pitman arm to
Ball stud (2)
7.
b. Using rope, tie drag link (1) out of
booster cylinder
the way.
drag link (1)
Remove (page 4-955), and using rope, tie
Wheel to booster
Booster cylinder
8.
up front end of booster cylinder.
drag link
and steering arm
Using 7/16-inch wrench, unscrew and take
Grease fitting (6)
Booster cylinder (5)
9.
out.
a. Using pliers, take out.
Cotter pin (9)
10.
Ball stud (7) to
b. Get rid of.
bracket (8)
Using 1 13/16-inch socket, extension, and
Nut (10)
11.
3/4-inch drive handle, unscrew and take
out.
Using hand jack, chain plate, and chain,
Ball stud (7)
12. Bracket (8)
press out.
Take out.
Booster cylinder (5)
13.
DISASSEMBLY
CAUTION
Do not let dirt get into power steering booster cylinder. Dirt will damage cylinder.
Using wire brush, clean area around
Booster cylinder (5)
14.
adapters (11).
4-1018
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |