CABLE DRAIN VALVE AND CABLE

TM9-2320-270-20-2

CABLE DRAIN VALVE AND CABLE

This task covers:

a. Removal (page 4-710)

b. Installation (page 4-712)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher, cable bracket to battery box

Handle, ratchet, 3/8-inch drive

bracket (two required)

Pliers, slip-joint, straight-nose

Lockwasher, cable to bracket

Screwdriver, flat-tip, 3/8-inch

Tape, teflon (item 22, appendix C)

Socket, 9/16-inch, 3/8-inch drive

Tape measure

Personnel Required

Wrench, open-end, 9/16-inch

Wrench, open-end, 1 1/16-inch

One

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

Drain (TM 9-2320-270-10).

Air system

Using screwdriver and pliers, unscrew

2. Drain cable (1)

Screw (3)

and take out.

stop (2)

Take off.

3. Drain cable (1)

Pull out.

Cable (1)

4. Drain valve (4) and

loop clamp (5)

Drain valve (4)

Using 1 1/16-inch wrench, unscrew and

5. Elbow (6)

take out.

Nut (8) and

Using 11/16-inch wrench, unscrew and

6. Drain cable (1) to

Iockwasher (9)

slide back along cable.

bracket (7)

Pull out.

Cable (1)

7. Bracket (7)

Lockwasher (9)

Get rid of Iockwasher (9).

4-710