MAIN TRANSMISSION SHIFT CONTROL

TM 9-2320-270-20-2

CHAPTER 4 -

CONTINUED

MAINTENANCE INSTRUCTIONS - CONTINUED

Section Vll. TRANSMISSION MAINTENANCE

Page

Oil Filter to Transmission Lines

Auxiliary Transmission Shift

Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-534

and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-571

External Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-563

Retarder Control Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-547

Shift Control Housing and

Heat Exchanger to Transmission

4-538

Lines and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-568

Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Transmission Dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-542

Internal Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-562

4-545

Transmission Oil Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Main Transmission Shift Control . . . . . . . . . . . . . . . . 4-525

MAIN TRANSMISSION SHIFT CONTROL

This task covers:

c. Installation (page 4-528)

a. Removal (page 4-526)

d. Adjustment (page 4-533)

b. Cleaning/Inspection (page 4-528)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher, bracket to transmission

Handle, ratchet, 3/8-inch drive

Lockwasher, cable to lever

Screwdriver, cross-tip, number 3

Lockwasher, housing to cab floor

Screwdriver, flat-tip

Socket, 7/16-inch, 3/8-inch drive

(two required)

Lockwasher, housing to shift control

Socket, 9/16-inch, 3/8-inch drive

(four required)

Socket, 3/4-inch, 3/8-inch drive

Lockwasher, lever

Wrench, open-end, 7/16-inch

Lockwasher, U-bolt to bracket (two required)

(two required)

Wrench, open-end, 1/2-inch

Lockwasher, U-bolt to hanger (two required)

(two required)

Tag, marking (item 18, appendix C)

Wrench, open-end, 9/16-inch

Wrench, open-end, 3/4-inch

Personnel Required

Two

4-525