 |
|||
|
|
|||
|
Page Title:
HEAT EXCHANGER TO TRANSMISSION LINES AND FlTTINGS |
|
||
| ||||||||||
|
|
 TM 9-2320-270-20-2
HEAT EXCHANGER TO TRANSMISSION LINES AND FlTTINGS
This task covers:
c. Installation (page 4-570)
a. Removal (page 4-568)
b. Cleaning/Inspection (page 4-569)
INITIAL SETUP
Materials/Parts
Tools
Lockwasher, bracket to transmission
Extension, 5-inch, 3/8-inch drive
Lockwasher, clip to bracket
Handle, ratchet, 3/8-inch drive
Tape, teflon (item 22, appendix C)
Pan, drain
Socket, 9/16-inch, 3/8-inch drive
Personnel Required
Socket, 1/2-inch, 3/8-inch drive
Wrench, adjustable, 15-inch (two
One
required)
Wrench, open-end, 7/16-inch
Wrench, open-end, 1/2-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
a.
Put drain pan underneath.
Two draincocks (2)
1. Heat exchanger (1)
Using 7/16-inch wrench, unscrew and
b.
take out.
When fluid stops draining, screw in and
c.
tighten using 7/16-inch wrench.
Get rid of fluid (page 4-1).
d.
Using 1/2-inch socket, handle, and
a.
Screw (5), lock-
2. Two clips (3) to
1/2-inch wrench, unscrew and take out.
washer (6), and
bracket (4)
b.
Get rid of Iockwasher (6).
nut (7)
Take off.
Two clips (3)
3. Bracket (4) and two
hoses (8)
a. Using 9/16-inch socket, extension, and
Screw (10) and
4. Bracket (4) to
handle, unscrew and take out.
Iockwasher (11)
transmission (9)
b. Get rid of Iockwasher (11).
Take off.
Bracket (4)
5. Transmission (9)
Using two adjustable wrenches, unscrew
Two hoses (8)
6. Two elbows (12)
and take off.
4-568
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals