BATTERY BOX AND BRACKETS

TM 9-2320-270-20-1

BATTERY BOX AND BRACKETS

This task covers:

Repair (page 4-471)

a. Removal (page 4-466)

Assembly (page 4-471)

b. Disassembly (page 4-470)

Installation (page 4-473)

c. Cleaning/Inspection (page 4-471)

INITIAL SETUP

Materials/Parts Continued

Tools

Lockwasher, step assembly to battery box

Extension, 3-inch, 3/8-inch drive

(four required)

Handle, ratchet, 3/8-inch drive

Lockwasher, fuel line support to rear battery

Handle, ratchet, 1/2-inch drive

box bracket

Socket, 1/2-inch, 3/8-inch drive

Lockwasher, four battery stop angles to

Socket, 9/16-inch, 1/2-inch drive

battery box (12 required)

Socket, 3/4-inch, 1/2-inch drive

Self-locking nut, center battery box

Socket, 15/16-inch, 1/2-inch drive

bracket to fuel tank brace angle to

Wrench, box, 1/2-inch

center battery box bracket (two

Wrench, box, 9/16-inch

required)

Wrench, box, 3/4-inch

Self-locking nut, battery box brackets to

Wrench, box, 15/16-inch

frame (nine required)

Rope (item 11, appendix C)

Materials/Parts

Personnel Required

Lockwasher, battery box to battery

box brackets (12 required)

Three

Lockwasher, fender brace to front

battery box brackets (2 required)

Equipment Condition

Lockwasher, air tank drain knob to

center battery box bracket (two

Batteries removed (page 4-462).

required)

Lockwasher, rear battery box bracket

to hose bracket

Lockwasher, four tiedown channels to

battery box (16 required)

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Electrolyte and battery corrosion can cause burns. Wear safety goggles and rubber

gloves. If electrolyte or battery corrosion contacts eyes, skin, or clothing, flush

immediately with large amounts of clean water, neutralize with baking soda solution,

and seek medical attention.

4-466