BLACKOUT HEADLIGHT ASSEMBLY

TM 9-2320-270-20-1

BLACKOUT HEADLIGHT ASSEMBLY

This task covers:

c. Assembly (page 4-388)

a. Removal (page 4-386)

d. Installation (page 4-388)

b. Disassembly (page 4-366)

INITIAL SETUP

Materials/Parts

Tools

Gasket

Handle, ratchet, 3/8-inch drive

Lockwasher, blackout headlight to bracket

Knife, pocket

Packing, preformed

Pliers, long-nose

Screwdriver, cross-tip, number 2

Personnel Required

Screwdriver, flat-tip, 1/4-inch

Screwdriver, offset, cross-tip,

One

number 2

Socket, 9/16-inch, 3/8-inch drive

ACTION

REMARKS

ITEM

LOCATION

NOTE

To change lamp go to disassembly. It is not necessary to remove light assembly to

change lamp.

REMOVAL

Unplug.

Connector (2)

1. Blackout

headlight (1)

Nut (4) and

a. Using socket and handle, unscrew and

2. Blackout headlight

and take off.

Iockwasher (5)

(1) to bracket (3)

b. Get rid of Iockwasher (5).

Take off.

Blackout

3. Bracket(3)

headlight (1)

Take off.

Spacer (6)

4. Blackout

headlight (1)

DISASSEMBLY

Using fiat-tip screwdriver, unscrew.

Three screws (9)

5. Door (7) to body (8)

4-386