DOOR AJAR WARNING SWITCH

TM 9-2320-270-20-1

DOOR AJAR WARNING SWITCH

This task covers:

a. Removal (page 4-312)

b. Installation (page 4-313)

INITIAL SETUP

Personnel Required

Tools

One

Screwdriver, flat-tip, 3/16-inch

Equipment Condition

Materials/Parts

Battery ground cable disconnected

Lockwasher, terminal (two required)

(page 4-444).

Tag, marking (item 18, appendix C)

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

CAUTION

Make sure battery cable is disconnected before replacing door warning switch to prevent

possible damage to electrical system.

NOTE

Tag wires according to general maintenance instructions (page 4-1).

Using screwdriver, unscrew and take out.

Two screws (3)

1. Door ajar warning

switch (1), to door

pillar (2)

Pull out part way.

Door ajar warning

2. Door pillar (2)

switch (1)

a. Using screwdriver, unscrew and take

Screw (5), lock-

3. Terminal (4)

off.

washer (6), and

b. Get rid of Iockwasher (6).

wire 048 (7)

a. Using screwdriver, unscrew and take

Screw (9), lock-

4. Terminal (8)

off.

washer (10), and

b. Get rid of Iockwasher (10).

wire 331 (11)

4-312