BLACKOUT LIGHT SWITCH

TM 9-2320-270-20-1

WORK LIGHT SWITCH - CONTINUED

INSTALLATION - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE:

1. Connect battery ground cable (page 4-444).

2. Check operation (TM 9-2320-270-10).

3. Close instrument panel (page 4-244).

TASK ENDS HERE

BLACKOUT LIGHT SWITCH

This task covers:

b. Installation (page 4-300)

INITIAL SETUP

Personnel Required

Tools

One

Screwdriver, flat-tip, 1/4-inch,

Wrench, box, 9/18-inch

Equipment Condition

Materials/Parts

Battery ground cable disconnected

Lockwasher, terminal screw

Instrument panel open (page 4-244).

(12 required)

Tag, marking (item 18, appendix C)

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure battery ground cable is disconnected before doing this task. Failure to dis-

connect battery ground cable can cause personal injury and damage to electrical

system.

NOTE

Tag wires according to general maintenance instructions, (page 4-1).

4-298