|
|
TM9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 10,
At winch station (5), remove winch front cover (page 4-1136). Using
multimeter set at 30 vdc, put red probe on terminal for wire no. 154-A (6)
on electric throttle switch (7), and black probe to good ground.
If meter reads no voltage, put key in OFF position and notify direct
support maintenance.
With winch throttle valve (7) in ON position, and using multimeter set at 30
Step 11.
vdc, put red probe on terminal for air solenoid valve wire no. 170 (8) and
black probe to good ground.
If meter reads no voltage, put key in OFF position and replace winch
throttle valve (page 4-1141).
TA239777
3-191
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |