TRANSMISSION OIL TEMPERATURE GAGE DOES NOT INDICATE CORRECT TEMPERATURE

TM 9-2320-270-20-1

TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

40. TRANSMISSION OIL TEMPERATURE GAGE DOES NOT INDICATE CORRECT TEMPERATURE.

Step 1.

Be sure transmission oil is cold. At disconnect wire no. 422 (2), using

multimeter set at RX-10, put red probe to terminal (3) on sending unit (1)

and black probe on sending unit body (4).

If multimeter does not show continuity, replace sending unit

Step 2.

Go to instrument panel, put ignition switch in ON position, and check if fuel gage

(5) works.

If fuel gage does not work, put ignition switch in OFF position and go to

FUEL LEVEL GAGE SHOWS INCORRECT FUEL LEVEL (page 3-32).

TA239696

3-109