|
|
TM 9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
25. BLACKOUT HEADLIGHT OR MARKER LIGHT DOES NOT WORK.
NOTE
If blackout headlight and both marker lights do not work, go to step 2.
Step 1.
Remove blackout headlight lamp (page 4-386) or marker light lamp (1) (page
4-370). Using multimeter set at RX1, put probes on contact (2) and lamp
housing (3).
a. If meter reads zero, install blackout headlight lamp (page 4-386)
or marker light lamp (page 4-370), and notify direct support
maintenance.
b. If meter does not read zero, replace lamp (l), blackout headlight
Put headlight switch (4) in on position. Put blackout switch (5) to BLACKOUT
Step 2.
position. Open instrument panel (page 4-244). Using multimeter set at 30
vdc, put red probe on circuit breaker terminal (6) and black probe on panel (7).
If meter reads no voltage, go to step 3.
3-67
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |