FRONT DIRECTIONAL LIGHT DOES NOT WORK - CONTINUED.

TM 9-2320-270-20-1

TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Step 5.

Using

set at 30

put red probe on circuit breaker terminal (6) and

black probe on panel (4).

If meter reads no voltage, close instrument panel (page 4-244) and

notify direct support maintenance.

Using multimeter set at 30 vdc, put red probe on circuit breaker terminal (7) and

Step 6.

black probe on panel (4).

a. If meter reads no voltage, replace TURN SIG circuit breaker

b. If meter reads voltage, close instrument panel (page 4-244) and

notify direct support maintenance.

Step 7.

Put clearance light switch in OFF position. Put headlight switch (8) in ON

position.

a. If headlights work, put headlight switch in OFF position, close instru-

ment panel (page 4-244) and notify direct support maintenance.

b. If headlights do not work, do steps 6 thru 9 under BOTH HEADLIGHTS

TA239645

3-57